Skip to content
KEGO
ESEN
Get a quote

Pergolas · Bespoke and kit

Bespoke timber pergolas in Girona and the Costa Brava.

Bespoke or kit timber pergolas, properly engineered and anchored. Every project starts with an estimate from your photos and a 3D design.

Treated pine pergola over benches beside the house in L'Escala
L'Escala · Treated pine pergola · 3.5 × 3.5 m

What’s included

Shade built to last.

We size the timbers and anchors for the span and the site, so the pergola stands firm and lines up with the house.

  • 01Estimate from your photos and measurements
  • 023D design before we start
  • 03Structural sizing
  • 04Wall or ground anchors
  • 05Timber treated for outdoor use
  • 06A clean site when we finish

Before and after

From bare courtyard to shade over the benches.

In L'Escala the courtyard had nowhere to sit in the shade. We built a 3.5 × 3.5 m treated pine pergola over the built-in benches.

L'Escala · Treated pine · 3.5 × 3.5 m
After: finished project
Before the work, from the same viewpoint
BeforeSlide to compareAfter

Pergola kits · Naturaland

Prefer a kit model?

As well as bespoke pergolas, we install Naturaland pergola kits: GL24h glulam spruce, with the machining and joints done at the factory. We help you choose the model and size, and we take care of the anchoring and assembly.

Timber
GL24h glulam spruce
Height
2.40 to 3 m
Colour
Natural, or factory-treated in green or brown
Atenas pergola kit

Atenas

Freestanding or wall-mounted
Sizes
3 × 3 · 3 × 4 · 4 × 4 · 6 × 3 · 6 × 4 m
Sections
Posts 12 × 12 or 14 × 14 cm · Beams 16 × 8 or 20 × 10 cm · Rafters 12 × 6 cm
Barcelona pergola kit

Barcelona

Freestanding or wall-mounted
Sizes
3 × 3 · 4 × 4 · 8 × 4 m
Sections
Posts 12 × 12 or 14 × 14 cm · Beams 16 × 8 or 20 × 10 cm · Rafters 12 × 6 cm
Roma pergola kit

Roma

Freestanding
Sizes
3 × 3 · 3 × 4 · 4 × 4 · 6 × 3 · 6 × 4 m
Sections
Posts 12 × 12 or 14 × 14 cm · Beams 16 × 8 cm · Rafters 12 × 6 cm
Berna pergola kit

Berna

Freestanding or wall-mounted
Sizes
3 × 3 · 3 × 4 · 4 × 4 · 6 × 3 · 6 × 4 m
Sections
Posts 20 × 10 or 24 × 12 cm · Beams 16 × 8 or 20 × 10 cm · Rafters 12 × 6 cm

Images: Naturaland. Catalogue sizes; other sizes on request.

Ask about a model

FAQs

Before you ask for a quote.

What timber do you use for pergolas?

Pine treated for outdoor use and, where the span or load calls for it, glulam spruce.

Do you install pergola kits?

Yes. We install Naturaland kit models: we help you choose the size and take care of the anchoring and assembly. The kits can come factory-treated in green or brown.

Does a pergola need maintenance?

Yes: timber needs regular maintenance. We’ll explain how and how often.

How much does it cost?

It depends on the area, the material and the substructure. With photos and rough measurements we can give you an estimate within 24–48 hours, without visiting your home. The fixed quote follows the site visit, together with the 3D design.

What guarantee do I get?

Two guarantees: the manufacturer’s warranty on the material, and ours: a 2-year installation guarantee, in writing in the quote, on every project carried out to our technical proposal.

Do you work in my area?

Yes, if you’re within an hour of Girona: the whole province, from Figueres and Roses to Olot, Blanes and the Costa Brava. Depending on the project, we also work in and around Barcelona.

Contact

Want shade on your terrace or in your garden?

Tell us what you have in mind. We reply within 24 hours and, with photos and measurements, we send you an estimate within 24 to 48 hours.

Prefer to talk directly? kego.carpentry@gmail.com Instagram: @kego.carpentry
One of the two is enough.

Data controller: KEGO Carpentry. Purpose: to reply to your enquiry. We do not share your data with third parties. You can exercise your rights by emailing kego.carpentry@gmail.com.